{"id":3224,"date":"2026-06-10T09:45:26","date_gmt":"2026-06-10T09:45:26","guid":{"rendered":"https:\/\/wp.hsafetyjackets.com\/?p=3224"},"modified":"2026-06-11T02:49:07","modified_gmt":"2026-06-11T02:49:07","slug":"ansi-class-2-vs-class-3-safety-jacket","status":"publish","type":"post","link":"https:\/\/wp.hsafetyjackets.com\/ja\/ansi-class-2-vs-class-3-safety-jacket\/","title":{"rendered":"ANSI Class 2 vs Class 3 Safety Jacket: Which Hi-Vis Class Does Your Team Need?"},"content":{"rendered":"<p>If your team works near vehicles, equipment, or low-light conditions, choosing between <strong>ANSI Class 2 and Class 3<\/strong> hi-vis safety jackets matters for both compliance and worker safety. The wrong class can mean inadequate visibility for the hazard \u2014 or unnecessary cost for a garment that exceeds what your worksite actually requires.<\/p>\n\n<p>As a safety jacket manufacturer with nearly two decades of experience supplying B2B buyers worldwide, we regularly see procurement teams, safety managers, and contractors wrestling with this exact decision. This guide breaks down the differences between <strong>ANSI Class 2 and Class 3 safety vests and jackets<\/strong> in plain language, with a comparison table, use-case recommendations, and compliance considerations \u2014 so you can specify the right garment for your team on the first order.<\/p>\n\n<p><a href=\"\/ja\/shop\/\">Browse our certified safety jackets<\/a> to see garments that meet both ANSI and EN ISO standards.<\/p>\n\n<h2>ANSI\/ISEA 107 Visibility Classes Explained<\/h2>\n\n<p>\u306b\u3064\u3044\u3066 <strong>ANSI\/ISEA 107-2020<\/strong> standard \u2014 published by the International Safety Equipment Association \u2014 defines the performance requirements for high-visibility safety apparel in the United States. It covers the amount of fluorescent background material, the placement and area of retroreflective tape, and the garment types that achieve each performance class.<\/p>\n\n<p>The standard defines three visibility classes:<\/p>\n\n<ul>\n  <li><strong>\u30af\u30e9\u30b91<\/strong> \u2014 Lowest visibility level. Minimal background material and reflective tape. Typically used in environments where workers are well separated from traffic moving at low speeds. Examples: parking attendants, sidewalk maintenance, warehouse picking areas.<\/li>\n  <li><strong>\u30af\u30e9\u30b92<\/strong> \u2014 Intermediate visibility level. Significantly more background material and reflective tape than Class 1. Designed for workers near vehicular traffic, or in conditions with reduced visibility such as rain, fog, or dusk. This is the most commonly specified class for general workwear.<\/li>\n  <li><strong>\u30af\u30e9\u30b93<\/strong> \u2014 Highest visibility level. Maximum background material coverage and reflective tape area, including coverage on sleeves or legs for 360-degree visibility. Intended for high-risk environments such as busy roadways, complex backgrounds, and low-light or nighttime conditions.<\/li>\n<\/ul>\n\n<p>For B2B procurement teams, the Class 2 vs Class 3 decision is the most common specification point \u2014 and the one with the biggest impact on both compliance and budget.<\/p>\n\n<h2>Class 2 vs Class 3 \u2014 Quick Comparison Table<\/h2>\n\n<p>The table below summarizes the key differences between ANSI Class 2 and Class 3 safety garments. Use this as a quick reference before diving into the detailed use-case guidance.<\/p>\n\n<table>\n  <thead>\n    <tr>\n      <th>\u7279\u5fb4<\/th>\n      <th>ANSI Class 2<\/th>\n      <th>ANSI Class 3<\/th>\n    <\/tr>\n  <\/thead>\n  <tbody>\n    <tr>\n      <td>Minimum background material (commonly referenced under ANSI\/ISEA 107-2020)<\/td>\n      <td>approximately 775 sq in (0.50 m\u00b2)<\/td>\n      <td>approximately 1,240 sq in (0.80 m\u00b2)<\/td>\n    <\/tr>\n    <tr>\n      <td>Minimum reflective tape area (commonly referenced under ANSI\/ISEA 107-2020)<\/td>\n      <td>approximately 201 sq in (0.13 m\u00b2)<\/td>\n      <td>approximately 310 sq in (0.20 m\u00b2)<\/td>\n    <\/tr>\n    <tr>\n      <td>Tape placement<\/td>\n      <td>Torso encirclement<\/td>\n      <td>Torso + sleeves or legs (360\u00b0)<\/td>\n    <\/tr>\n    <tr>\n      <td>Common garment types<\/td>\n      <td>Vests, short-sleeve shirts<\/td>\n      <td>Jackets, coveralls, long-sleeve shirts<\/td>\n    <\/tr>\n    <tr>\n      <td>Typical use cases<\/td>\n      <td>Warehouses, parking, surveying, airports<\/td>\n      <td>Roadwork, construction, emergency services<\/td>\n    <\/tr>\n    <tr>\n      <td>Traffic exposure context<\/td>\n      <td>Low-speed, well-separated from traffic<\/td>\n      <td>Higher-speed, active roadway exposure<\/td>\n    <\/tr>\n    <tr>\n      <td>Night \/ low-light suitability<\/td>\n      <td>\u4e2d\u7a0b\u5ea6<\/td>\n      <td>Maximum<\/td>\n    <\/tr>\n    <tr>\n      <td>Relative cost<\/td>\n      <td>Lower<\/td>\n      <td>Higher (more material, more coverage)<\/td>\n    <\/tr>\n  <\/tbody>\n<\/table>\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/wp.hsafetyjackets.com\/wp-content\/uploads\/2026\/06\/reflective-tape-placement-comparison.png\" alt=\"Technical infographic comparing ANSI Class 2 hi-vis vest showing reflective tape around torso only versus ANSI Class 3 hi-vis jacket showing reflective tape on both torso and sleeves for 360-degree visibility coverage\" width=\"100%\" style=\"border-radius: 8px; margin: 1.5rem 0;\"><\/figure>\n\n<!-- INLINE CTA -->\n<div class=\"my-8 rounded-lg border border-orange-200 bg-orange-50 p-5 not-prose\">\n  <p class=\"text-base font-bold text-slate-900\">Looking for certified high-visibility workwear?<\/p>\n  <p class=\"mt-2 text-sm leading-relaxed text-slate-700\">Shop Class 2 safety vests, compare industry requirements, or request a bulk quote for custom logo and wholesale orders.<\/p>\n  <div class=\"mt-4 flex flex-wrap gap-3\">\n    <a href=\"\/ja\/shop\/?category=safety-vests\" class=\"inline-flex items-center rounded-lg bg-orange-600 px-4 py-2 text-sm font-bold text-white\">Shop Class 2 safety vests<\/a>\n    <a href=\"https:\/\/wp.hsafetyjackets.com\/ja\/\u30b3\u30f3\u30bf\u30af\u30c8\/\" class=\"inline-flex items-center rounded-lg border border-orange-300 bg-white px-4 py-2 text-sm font-bold text-orange-700\">Request a bulk quote<\/a>\n    <a href=\"\/ja\/industries\/\" class=\"inline-flex items-center rounded-lg border border-slate-200 bg-white px-4 py-2 text-sm font-bold text-slate-700\">View industry solutions<\/a>\n  <\/div>\n<\/div>\n\n<h2>When to Choose ANSI Class 2<\/h2>\n\n<figure class=\"wp-block-image size-full\"><img decoding=\"async\" src=\"https:\/\/wp.hsafetyjackets.com\/wp-content\/uploads\/2026\/06\/warehouse-vs-road-construction.png\" alt=\"Split scene comparison: left side shows a warehouse worker wearing a Class 2 lime-green hi-vis vest in a well-lit logistics center with forklifts, right side shows a construction worker wearing a Class 3 orange hi-vis jacket with reflective sleeves at a dusk road construction site with traffic cones\" width=\"100%\" style=\"border-radius: 8px; margin-bottom: 1.5rem;\"><\/figure>\n\n<p><strong>ANSI Class 2<\/strong> safety garments provide a solid level of visibility for workers who need to be seen but are not in the highest-risk environments. If your workers are around vehicles moving at moderate speeds, or if visibility conditions are generally good with occasional challenges like overcast weather or twilight, Class 2 is typically the right specification.<\/p>\n\n<h3>Best use cases for Class 2<\/h3>\n\n<ul>\n  <li><strong>Warehouse and logistics operations<\/strong> \u2014 Forklift traffic, loading docks, and distribution centers where vehicle speeds stay low but visibility still matters. <a href=\"\/ja\/industries\/warehouse\/\">See our warehouse safety solutions<\/a>.<\/li>\n  <li><strong>Airport ground crews<\/strong> \u2014 Ramp workers, baggage handlers, and ground support teams operating near taxiing aircraft and ground vehicles.<\/li>\n  <li><strong>Surveying teams<\/strong> \u2014 Surveyors working along roadsides or on open sites where moderate visibility is needed for extended outdoor periods.<\/li>\n  <li><strong>School crossing guards and event staff<\/strong> \u2014 Workers managing pedestrian traffic in areas with controlled vehicle access.<\/li>\n  <li><strong>Parking lot attendants and toll booth operators<\/strong> \u2014 Low-speed vehicle environments where being seen is important but risk levels are moderate.<\/li>\n<\/ul>\n\n<h3>Recommended Class 2 garments<\/h3>\n\n<ul>\n  <li><strong>Mesh safety vests<\/strong> \u2014 Lightweight, breathable, and cost-effective for warm climates and indoor use. Ideal for high-volume orders where budget is a consideration.<\/li>\n  <li><strong>Short-sleeve hi-vis shirts<\/strong> \u2014 More coverage than a vest, suitable for teams who need a more professional appearance while maintaining compliance.<\/li>\n  <li><strong>Two-tone safety vests<\/strong> \u2014 Enhanced contrast with darker lower panels that resist showing dirt \u2014 practical for worksites with dust or mud.<\/li>\n<\/ul>\n\n<p><a href=\"\/ja\/shop\/?category=safety-vests\">Shop Class 2 safety vests<\/a> to see our range of ANSI-compliant options.<\/p>\n\n<h3>Class 2 limitations<\/h3>\n\n<p>Class 2 garments do not provide arm or sleeve coverage, which means workers are less visible from the side and rear in complex visual environments. They are also <strong>not suitable<\/strong> for high-speed traffic zones or for work in conditions where the background creates visual clutter \u2014 such as busy construction sites with multiple overlapping activities.<\/p>\n\n<h2>When to Choose ANSI Class 3<\/h2>\n\n<p><strong>ANSI Class 3<\/strong> is the highest visibility classification under the ANSI\/ISEA 107 standard. These garments use more fluorescent background material and more reflective tape than Class 2, and critically, they <strong>require reflective coverage on the sleeves or legs<\/strong>. This 360-degree visibility makes the worker&#8217;s human form recognizable from any angle \u2014 a significant safety advantage in high-risk environments.<\/p>\n\n<h3>Best use cases for Class 3<\/h3>\n\n<ul>\n  <li><strong>Road construction and civil works<\/strong> \u2014 Workers near active traffic lanes with higher-speed vehicle exposure. Many roadway work zones reference Class 2 or Class 3 high-visibility garments depending on exposure, task, and local DOT requirements. <a href=\"\/ja\/industries\/road-traffic\/\">See our road &amp; traffic safety solutions<\/a>.<\/li>\n  <li><strong>Traffic control and flagging teams<\/strong> \u2014 Workers who direct or interact with moving vehicles and need maximum conspicuity.<\/li>\n  <li><strong>Emergency responders and tow truck operators<\/strong> \u2014 First responders, utility crews, and roadside assistance teams working in unpredictable, high-speed environments. <a href=\"\/ja\/industries\/\">Explore our industry safety solutions<\/a>.<\/li>\n  <li><strong>Railway maintenance crews<\/strong> \u2014 Railway workers face unique visibility challenges with high-speed trains and complex signaling environments. <a href=\"\/ja\/industries\/railway\/\">View our railway safety requirements<\/a>.<\/li>\n  <li><strong>Night work and low-visibility conditions<\/strong> \u2014 Any worksite where reduced ambient light, weather, or complex visual backgrounds demand the highest level of conspicuity.<\/li>\n<\/ul>\n\n<h3>Recommended Class 3 garments<\/h3>\n\n<ul>\n  <li><strong>Waterproof reflective jackets<\/strong> \u2014 Essential for outdoor crews working in rain. Sealed seams and waterproof zippers keep workers dry while maintaining full Class 3 visibility.<\/li>\n  <li><strong>Hi-vis softshell jackets<\/strong> \u2014 Cold-weather workwear with windproof outer layers and fleece lining. Ideal for winter construction and utility maintenance.<\/li>\n  <li><strong>Fire-resistant safety jackets<\/strong> \u2014 For workers who need both high visibility and flame resistance, such as oil and gas crews or welding support teams.<\/li>\n  <li><strong>Two-tone reflective workwear<\/strong> \u2014 Professional appearance with enhanced durability. Darker lower panels resist staining on dirty worksites.<\/li>\n<\/ul>\n\n<p><a href=\"\/ja\/shop\/?category=reflective-jackets\">Shop Class 3 reflective jackets<\/a> to browse our full range.<\/p>\n\n<h3>Class 3 advantages<\/h3>\n\n<p>The primary advantage of Class 3 is the <strong>360-degree visibility<\/strong> provided by sleeve or arm coverage. When a worker turns, reaches, or gestures, the reflective tape on the sleeves creates a recognizable human silhouette \u2014 something a torso-only vest cannot achieve. This is particularly important in environments where drivers or equipment operators need to identify a person (versus a static object) from a distance.<\/p>\n\n<p>Class 3 garments also typically offer better weather protection since they are designed as jackets or coveralls rather than vests. This means your team gets both visibility and environmental protection in a single garment.<\/p>\n\n<h2>When to Wear Class 2 vs Class 3: A Quick Decision Guide<\/h2>\n\n<p>If you are still unsure which class your team needs, walk through this decision tree:<\/p>\n\n<ol>\n  <li><strong>Are workers exposed to higher-speed roadway traffic?<\/strong>\n    <ul>\n      <li><strong>Yes<\/strong> \u2192 Class 3. High-speed traffic requires maximum conspicuity with sleeve coverage.<\/li>\n      <li><strong>No<\/strong> \u2192 Continue to question 2.<\/li>\n    <\/ul>\n  <\/li>\n  <li><strong>Is work conducted in low-light, nighttime, or adverse weather conditions?<\/strong>\n    <ul>\n      <li><strong>Yes<\/strong> \u2192 Class 3. Reduced visibility demands the additional reflective material and 360-degree coverage.<\/li>\n      <li><strong>No<\/strong> \u2192 Continue to question 3.<\/li>\n    <\/ul>\n  <\/li>\n  <li><strong>Is the worksite visually complex \u2014 multiple activities, equipment, or vehicles operating simultaneously?<\/strong>\n    <ul>\n      <li><strong>Yes<\/strong> \u2192 Class 3. Complex backgrounds make it harder for operators to distinguish workers; sleeve coverage helps.<\/li>\n      <li><strong>No<\/strong> \u2192 Continue to question 4.<\/li>\n    <\/ul>\n  <\/li>\n  <li><strong>Are workers near vehicles or equipment moving at low speeds in well-lit conditions?<\/strong>\n    <ul>\n      <li><strong>Yes<\/strong> \u2192 Class 2 is typically sufficient. Warehouses, airports, and surveying sites commonly fall into this category.<\/li>\n      <li><strong>No<\/strong> \u2192 Class 1 may be adequate, but verify your jurisdiction&#8217;s minimum requirement.<\/li>\n    <\/ul>\n  <\/li>\n<\/ol>\n\n<p><strong>Rule of thumb:<\/strong> When in doubt, specify Class 3. It always exceeds Class 2 requirements, and the incremental cost is usually small compared to the safety benefit. For teams sourcing garments through <a href=\"\/ja\/wholesale\/\">wholesale or bulk orders<\/a>, the per-unit price difference between Class 2 and Class 3 becomes even more manageable at scale.<\/p>\n\n<h2>ANSI vs EN ISO 20471 \u2014 A Note for International Buyers<\/h2>\n\n<p>If your supply chain spans multiple regions, you may also encounter the <strong>EN ISO 20471<\/strong> standard, which is the European standard for high-visibility clothing. EN ISO 20471 also defines Class 1, 2, and 3 levels with comparable visibility requirements \u2014 Class 3 under EN ISO 20471 requires approximately 0.80 m\u00b2 of fluorescent material and approximately 0.20 m\u00b2 of retroreflective material, which is broadly similar to ANSI Class 3.<\/p>\n\n<p>However, <strong>ANSI\/ISEA 107 and EN ISO 20471 are not identical standards<\/strong>. They differ in testing methods, wash-cycle requirements, labeling formats, and the way garment types are classified. A garment that meets ANSI Class 3 does not automatically carry EN ISO 20471 certification \u2014 and vice versa. For buyers sourcing for international projects, it is important to verify which standard (or both) the end market requires.<\/p>\n\n<p>Many manufacturers, including HSafetyJackets, produce garments that are tested and certified to <strong>both ANSI\/ISEA 107 and EN ISO 20471<\/strong> standards. <a href=\"\/ja\/certifications\/\">View our certification comparison guide<\/a> for an overview of the key differences and what to ask your supplier.<\/p>\n\n<h2>Common Compliance Mistakes to Avoid<\/h2>\n\n<p>Through our experience supplying safety workwear to buyers globally, we see a few recurring specification errors:<\/p>\n\n<ul>\n  <li><strong>Ordering Class 2 for road work<\/strong> \u2014 Many buyers default to Class 2 vests for road crews because they are cheaper. However, many roadway work zones reference Class 2 or Class 3 high-visibility garments depending on exposure, task, and local DOT requirements. Always verify the local jurisdiction&#8217;s requirement before ordering.<\/li>\n  <li><strong>Assuming a vest can achieve Class 3<\/strong> \u2014 ANSI Class 3 <strong>requires sleeve or leg coverage<\/strong>. A vest alone \u2014 even one with extensive reflective tape \u2014 cannot meet Class 3 requirements. Workers need a jacket, coverall, or long-sleeve shirt to achieve Class 3 compliance.<\/li>\n  <li><strong>Ignoring dual-standard requirements<\/strong> \u2014 International supply chains often need garments that meet both ANSI\/ISEA 107 and EN ISO 20471. <a href=\"\/ja\/certifications\/\">Check our certification guide<\/a> for an overview of the major standards and how they compare.<\/li>\n  <li><strong>Not planning for seasonal variation<\/strong> \u2014 A Class 2 mesh vest may be perfect in summer but inadequate when weather conditions change. Consider whether your team needs a seasonal garment plan or a single Class 3 jacket that covers all conditions.<\/li>\n<\/ul>\n\n<h2>How to Order the Right Class for Your Team<\/h2>\n\n<p>Selecting the correct visibility class is a straightforward process once you have the right information. Here is a practical workflow for procurement teams:<\/p>\n\n<p><strong>Step 1: Assess worksite risk.<\/strong> Identify the vehicle speeds, traffic patterns, lighting conditions, and visual complexity of the worksite. Higher-speed roadway traffic and nighttime conditions point to Class 3. Low-speed, well-lit environments typically allow Class 2.<\/p>\n\n<p><strong>Step 2: Check local and state regulations.<\/strong> Many jurisdictions have specific requirements that go beyond the ANSI baseline. State DOTs, municipal procurement policies, and client-specific specifications can all mandate a minimum class. When in doubt, specify Class 3 \u2014 it always exceeds Class 2 requirements.<\/p>\n\n<p><strong>Step 3: Define quantity, sizes, and branding needs.<\/strong> Determine team size, size distribution, and whether you need custom logo printing or embroidery. <a href=\"\/ja\/custom\/\">Explore our OEM customization options<\/a> for logo placement, color matching, and packaging.<\/p>\n\n<p><strong>Step 4: Request samples and quotes.<\/strong> Before committing to a bulk order, request physical samples to verify fit, material quality, and print quality. <a href=\"https:\/\/wp.hsafetyjackets.com\/ja\/\u30b3\u30f3\u30bf\u30af\u30c8\/\">Contact our team<\/a> with your worksite details and we will recommend the right ANSI class and garment type, with competitive wholesale pricing.<\/p>\n\n<h2>Frequently Asked Questions<\/h2>\n\n<h3>Can I wear Class 3 instead of Class 2?<\/h3>\n\n<p>Yes \u2014 Class 3 exceeds Class 2 requirements, so wearing a Class 3 garment in a Class 2 environment is always compliant. However, Class 3 garments are typically heavier and more expensive. For indoor warehouses or low-risk environments, a Class 2 vest may be more comfortable and cost-effective. Consider upgrading to Class 3 if your worksite conditions may change to higher-risk scenarios.<\/p>\n\n<h3>Is ANSI Class 3 required for road work?<\/h3>\n\n<p>Many roadway work zones reference Class 2 or Class 3 high-visibility garments depending on exposure, task, and local DOT requirements. For higher-speed traffic control and low-light conditions, Class 3 is commonly specified. Always verify your jurisdiction&#8217;s current requirements, as state-level specifications can be stricter than the federal baseline.<\/p>\n\n<h3>Which ANSI class do warehouse workers need?<\/h3>\n\n<p>Class 2 is typically sufficient for indoor warehouse and logistics environments with low-speed vehicle traffic. Warehouse hi-vis requirements are typically determined through employer and site risk assessment, customer requirements, and applicable local rules. For outdoor yard operations with faster-moving vehicles, Class 3 may be more appropriate.<\/p>\n\n<h3>What is the difference in reflective tape requirements?<\/h3>\n\n<p>Class 2 requires approximately <strong>201 square inches<\/strong> (0.13 m\u00b2) of retroreflective tape, commonly referenced under ANSI\/ISEA 107-2020, typically arranged in horizontal bands around the torso. Class 3 requires approximately <strong>310 square inches<\/strong> (0.20 m\u00b2) and must include reflective material on the sleeves or arms to provide 360-degree visibility. The additional tape area and sleeve coverage are what make Class 3 garments significantly more visible from all angles.<\/p>\n\n<h3>Does EN ISO 20471 have similar classes?<\/h3>\n\n<p>Yes \u2014 EN ISO 20471, the European standard for high-visibility clothing, also defines Class 1, 2, and 3 with comparable visibility levels. Class 3 under EN ISO 20471 is the highest level, requiring approximately 0.80 m\u00b2 of fluorescent material and approximately 0.20 m\u00b2 of retroreflective material. The material area requirements are broadly similar to ANSI Class 3, though the testing methods, labeling requirements, and wash-test protocols differ. Many manufacturers, including HSafetyJackets, produce garments that meet both standards. <a href=\"\/ja\/certifications\/\">View our certification comparison guide<\/a> for details.<\/p>\n\n<h3>Can a vest be ANSI Class 3?<\/h3>\n\n<p><strong>No.<\/strong> ANSI Class 3 requires reflective coverage on the sleeves or legs. A vest \u2014 by definition a sleeveless garment \u2014 can only achieve Class 2. To reach Class 3, workers need a jacket with reflective sleeves, a coverall, or a long-sleeve shirt that meets the minimum material and tape area requirements. If your buyer or spec calls for &#8220;Class 3 vest,&#8221; clarify that the requirement is for a Class 3 jacket or shirt, not a vest.<\/p>\n\n<h3>What is the price difference between Class 2 and Class 3 safety jackets?<\/h3>\n\n<p>Class 3 garments generally cost more than Class 2 because they use more fluorescent fabric, more reflective tape, and often include additional features like waterproof zippers or full-length sleeves. The exact price difference varies depending on the fabric type, brand, order quantity, and any custom printing or embroidery. For bulk and wholesale orders, the per-unit gap narrows significantly. <a href=\"\/ja\/wholesale\/\">Request a quote<\/a> with your team size and specification to get accurate pricing for your specific requirements.<\/p>\n\n<h2>Source Certified Class 2 &amp; Class 3 Safety Jackets<\/h2>\n\n<p><em>This guide provides general information about ANSI\/ISEA 107 visibility classes and common roadway guidance. It is not a substitute for official regulatory advice. Always verify applicable requirements with your local jurisdiction, state DOT, or qualified safety professional.<\/em><\/p>\n\n<p>Whether your team needs Class 2 safety vests for warehouse operations or Class 3 reflective jackets for road construction, HSafetyJackets offers a full range of ANSI\/ISEA 107 and EN ISO 20471 certified garments. We supply safety workwear to buyers in over 60 countries, with custom logo printing, competitive bulk pricing, and documented certification for every order.<\/p>\n\n<p>Share your team size, worksite conditions, and compliance requirements. We will recommend the right hi-vis class and provide a detailed quote within 24 hours.<\/p>","protected":false},"excerpt":{"rendered":"<p>ANSI Class 2 vs Class 3: understand visibility requirements, garment types, and compliance rules. Choose the right hi-vis safety jacket for your worksite and team.<\/p>","protected":false},"author":1,"featured_media":3225,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[51,93],"tags":[94,98,87,86],"class_list":["post-3224","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-safety-blog","category-safety-standards","tag-ansi","tag-hi-vis","tag-safety-jackets","tag-safety-vests"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.2 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>hi-vis safety jackets<\/title>\n<meta name=\"description\" content=\"ANSI Class 2 vs Class 3: understand visibility requirements, garment types, and compliance rules. Choose the right hi-vis safety jacket for your worksite and team.\" \/>\n<meta name=\"robots\" content=\"noindex, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<meta property=\"og:locale\" content=\"ja_JP\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"hi-vis safety jackets\" \/>\n<meta property=\"og:description\" content=\"ANSI Class 2 vs Class 3: understand visibility requirements, garment types, and compliance rules. Choose the right hi-vis safety jacket for your worksite and team.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/wp.hsafetyjackets.com\/ja\/ansi-class-2-vs-class-3-safety-jacket\/\" \/>\n<meta property=\"og:site_name\" content=\"hi-vis safety jackets\" \/>\n<meta property=\"article:published_time\" content=\"2026-06-10T09:45:26+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-06-11T02:49:07+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/lyuj.sg-host.com\/wp-content\/uploads\/2026\/06\/class2-vs-class3-hero.png\" \/>\n\t<meta property=\"og:image:width\" content=\"1088\" \/>\n\t<meta property=\"og:image:height\" content=\"608\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"jeremy lyu\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"jeremy lyu\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"13 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":[\"Article\",\"BlogPosting\"],\"@id\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/ansi-class-2-vs-class-3-safety-jacket\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/ansi-class-2-vs-class-3-safety-jacket\\\/\"},\"author\":{\"name\":\"jeremy lyu\",\"@id\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/#\\\/schema\\\/person\\\/54a9586cf66db0dc89f9f49e5e47de6b\"},\"headline\":\"ANSI Class 2 vs Class 3 Safety Jacket: Which Hi-Vis Class Does Your Team Need?\",\"datePublished\":\"2026-06-10T09:45:26+00:00\",\"dateModified\":\"2026-06-11T02:49:07+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/ansi-class-2-vs-class-3-safety-jacket\\\/\"},\"wordCount\":2488,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/ansi-class-2-vs-class-3-safety-jacket\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/class2-vs-class3-hero.png\",\"keywords\":[\"ANSI\",\"hi-vis\",\"safety jackets\",\"Safety Vests\"],\"articleSection\":[\"SAFETY BLOG\",\"Safety Standards\"],\"inLanguage\":\"ja\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/wp.hsafetyjackets.com\\\/ansi-class-2-vs-class-3-safety-jacket\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/ansi-class-2-vs-class-3-safety-jacket\\\/\",\"url\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/ansi-class-2-vs-class-3-safety-jacket\\\/\",\"name\":\"hi-vis safety jackets\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/ansi-class-2-vs-class-3-safety-jacket\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/ansi-class-2-vs-class-3-safety-jacket\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/class2-vs-class3-hero.png\",\"datePublished\":\"2026-06-10T09:45:26+00:00\",\"dateModified\":\"2026-06-11T02:49:07+00:00\",\"description\":\"ANSI Class 2 vs Class 3: understand visibility requirements, garment types, and compliance rules. Choose the right hi-vis safety jacket for your worksite and team.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/ansi-class-2-vs-class-3-safety-jacket\\\/#breadcrumb\"},\"inLanguage\":\"ja\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/wp.hsafetyjackets.com\\\/ansi-class-2-vs-class-3-safety-jacket\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"ja\",\"@id\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/ansi-class-2-vs-class-3-safety-jacket\\\/#primaryimage\",\"url\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/class2-vs-class3-hero.png\",\"contentUrl\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/class2-vs-class3-hero.png\",\"width\":1088,\"height\":608},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/ansi-class-2-vs-class-3-safety-jacket\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"ANSI Class 2 vs Class 3 Safety Jacket: Which Hi-Vis Class Does Your Team Need?\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/#website\",\"url\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/\",\"name\":\"hi-vis safety jackets\",\"description\":\"high quality safety jackets\",\"publisher\":{\"@id\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/#organization\"},\"alternateName\":\"wholesale high quality safety jackets\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"ja\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/#organization\",\"name\":\"hi-vis safety jackets\",\"url\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ja\",\"@id\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/wp-content\\\/uploads\\\/2025\\\/03\\\/logo.png\",\"contentUrl\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/wp-content\\\/uploads\\\/2025\\\/03\\\/logo.png\",\"width\":480,\"height\":480,\"caption\":\"hi-vis safety jackets\"},\"image\":{\"@id\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/#\\\/schema\\\/person\\\/54a9586cf66db0dc89f9f49e5e47de6b\",\"name\":\"jeremy lyu\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ja\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/9cbe179ed025b7ea7082918aa75456bab762aad76c9da0b5a8f15a6d50400c15?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/9cbe179ed025b7ea7082918aa75456bab762aad76c9da0b5a8f15a6d50400c15?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/9cbe179ed025b7ea7082918aa75456bab762aad76c9da0b5a8f15a6d50400c15?s=96&d=mm&r=g\",\"caption\":\"jeremy lyu\"},\"sameAs\":[\"https:\\\/\\\/wp.hsafetyjackets.com\"],\"url\":\"https:\\\/\\\/wp.hsafetyjackets.com\\\/ja\\\/author\\\/admin\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"\u30cf\u30a4\u30d3\u30b9\u5b89\u5168\u30b8\u30e3\u30b1\u30c3\u30c8","description":"ANSI Class 2 vs Class 3: understand visibility requirements, garment types, and compliance rules. Choose the right hi-vis safety jacket for your worksite and team.","robots":{"index":"noindex","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"og_locale":"ja_JP","og_type":"article","og_title":"hi-vis safety jackets","og_description":"ANSI Class 2 vs Class 3: understand visibility requirements, garment types, and compliance rules. Choose the right hi-vis safety jacket for your worksite and team.","og_url":"https:\/\/wp.hsafetyjackets.com\/ja\/ansi-class-2-vs-class-3-safety-jacket\/","og_site_name":"hi-vis safety jackets","article_published_time":"2026-06-10T09:45:26+00:00","article_modified_time":"2026-06-11T02:49:07+00:00","og_image":[{"width":1088,"height":608,"url":"https:\/\/lyuj.sg-host.com\/wp-content\/uploads\/2026\/06\/class2-vs-class3-hero.png","type":"image\/png"}],"author":"jeremy lyu","twitter_card":"summary_large_image","twitter_misc":{"Written by":"jeremy lyu","Est. reading time":"13 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":["Article","BlogPosting"],"@id":"https:\/\/wp.hsafetyjackets.com\/ansi-class-2-vs-class-3-safety-jacket\/#article","isPartOf":{"@id":"https:\/\/wp.hsafetyjackets.com\/ansi-class-2-vs-class-3-safety-jacket\/"},"author":{"name":"jeremy lyu","@id":"https:\/\/wp.hsafetyjackets.com\/#\/schema\/person\/54a9586cf66db0dc89f9f49e5e47de6b"},"headline":"ANSI Class 2 vs Class 3 Safety Jacket: Which Hi-Vis Class Does Your Team Need?","datePublished":"2026-06-10T09:45:26+00:00","dateModified":"2026-06-11T02:49:07+00:00","mainEntityOfPage":{"@id":"https:\/\/wp.hsafetyjackets.com\/ansi-class-2-vs-class-3-safety-jacket\/"},"wordCount":2488,"commentCount":0,"publisher":{"@id":"https:\/\/wp.hsafetyjackets.com\/#organization"},"image":{"@id":"https:\/\/wp.hsafetyjackets.com\/ansi-class-2-vs-class-3-safety-jacket\/#primaryimage"},"thumbnailUrl":"https:\/\/wp.hsafetyjackets.com\/wp-content\/uploads\/2026\/06\/class2-vs-class3-hero.png","keywords":["ANSI","hi-vis","safety jackets","Safety Vests"],"articleSection":["SAFETY BLOG","Safety Standards"],"inLanguage":"ja","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/wp.hsafetyjackets.com\/ansi-class-2-vs-class-3-safety-jacket\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/wp.hsafetyjackets.com\/ansi-class-2-vs-class-3-safety-jacket\/","url":"https:\/\/wp.hsafetyjackets.com\/ansi-class-2-vs-class-3-safety-jacket\/","name":"\u30cf\u30a4\u30d3\u30b9\u5b89\u5168\u30b8\u30e3\u30b1\u30c3\u30c8","isPartOf":{"@id":"https:\/\/wp.hsafetyjackets.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/wp.hsafetyjackets.com\/ansi-class-2-vs-class-3-safety-jacket\/#primaryimage"},"image":{"@id":"https:\/\/wp.hsafetyjackets.com\/ansi-class-2-vs-class-3-safety-jacket\/#primaryimage"},"thumbnailUrl":"https:\/\/wp.hsafetyjackets.com\/wp-content\/uploads\/2026\/06\/class2-vs-class3-hero.png","datePublished":"2026-06-10T09:45:26+00:00","dateModified":"2026-06-11T02:49:07+00:00","description":"ANSI Class 2 vs Class 3: understand visibility requirements, garment types, and compliance rules. Choose the right hi-vis safety jacket for your worksite and team.","breadcrumb":{"@id":"https:\/\/wp.hsafetyjackets.com\/ansi-class-2-vs-class-3-safety-jacket\/#breadcrumb"},"inLanguage":"ja","potentialAction":[{"@type":"ReadAction","target":["https:\/\/wp.hsafetyjackets.com\/ansi-class-2-vs-class-3-safety-jacket\/"]}]},{"@type":"ImageObject","inLanguage":"ja","@id":"https:\/\/wp.hsafetyjackets.com\/ansi-class-2-vs-class-3-safety-jacket\/#primaryimage","url":"https:\/\/wp.hsafetyjackets.com\/wp-content\/uploads\/2026\/06\/class2-vs-class3-hero.png","contentUrl":"https:\/\/wp.hsafetyjackets.com\/wp-content\/uploads\/2026\/06\/class2-vs-class3-hero.png","width":1088,"height":608},{"@type":"BreadcrumbList","@id":"https:\/\/wp.hsafetyjackets.com\/ansi-class-2-vs-class-3-safety-jacket\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/wp.hsafetyjackets.com\/"},{"@type":"ListItem","position":2,"name":"ANSI Class 2 vs Class 3 Safety Jacket: Which Hi-Vis Class Does Your Team Need?"}]},{"@type":"WebSite","@id":"https:\/\/wp.hsafetyjackets.com\/#website","url":"https:\/\/wp.hsafetyjackets.com\/","name":"\u30cf\u30a4\u30d3\u30b9\u5b89\u5168\u30b8\u30e3\u30b1\u30c3\u30c8","description":"\u9ad8\u54c1\u8cea\u306e\u5b89\u5168\u30b8\u30e3\u30b1\u30c3\u30c8","publisher":{"@id":"https:\/\/wp.hsafetyjackets.com\/#organization"},"alternateName":"wholesale high quality safety jackets","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/wp.hsafetyjackets.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"ja"},{"@type":"Organization","@id":"https:\/\/wp.hsafetyjackets.com\/#organization","name":"\u30cf\u30a4\u30d3\u30b9\u5b89\u5168\u30b8\u30e3\u30b1\u30c3\u30c8","url":"https:\/\/wp.hsafetyjackets.com\/","logo":{"@type":"ImageObject","inLanguage":"ja","@id":"https:\/\/wp.hsafetyjackets.com\/#\/schema\/logo\/image\/","url":"https:\/\/wp.hsafetyjackets.com\/wp-content\/uploads\/2025\/03\/logo.png","contentUrl":"https:\/\/wp.hsafetyjackets.com\/wp-content\/uploads\/2025\/03\/logo.png","width":480,"height":480,"caption":"hi-vis safety jackets"},"image":{"@id":"https:\/\/wp.hsafetyjackets.com\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/wp.hsafetyjackets.com\/#\/schema\/person\/54a9586cf66db0dc89f9f49e5e47de6b","name":"\u30b8\u30a7\u30ec\u30df\u30fc\u30fb\u30ea\u30e5\u30a6","image":{"@type":"ImageObject","inLanguage":"ja","@id":"https:\/\/secure.gravatar.com\/avatar\/9cbe179ed025b7ea7082918aa75456bab762aad76c9da0b5a8f15a6d50400c15?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/9cbe179ed025b7ea7082918aa75456bab762aad76c9da0b5a8f15a6d50400c15?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/9cbe179ed025b7ea7082918aa75456bab762aad76c9da0b5a8f15a6d50400c15?s=96&d=mm&r=g","caption":"jeremy lyu"},"sameAs":["https:\/\/wp.hsafetyjackets.com"],"url":"https:\/\/wp.hsafetyjackets.com\/ja\/author\/admin\/"}]}},"_links":{"self":[{"href":"https:\/\/wp.hsafetyjackets.com\/ja\/wp-json\/wp\/v2\/posts\/3224","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/wp.hsafetyjackets.com\/ja\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/wp.hsafetyjackets.com\/ja\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/wp.hsafetyjackets.com\/ja\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/wp.hsafetyjackets.com\/ja\/wp-json\/wp\/v2\/comments?post=3224"}],"version-history":[{"count":6,"href":"https:\/\/wp.hsafetyjackets.com\/ja\/wp-json\/wp\/v2\/posts\/3224\/revisions"}],"predecessor-version":[{"id":3233,"href":"https:\/\/wp.hsafetyjackets.com\/ja\/wp-json\/wp\/v2\/posts\/3224\/revisions\/3233"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/wp.hsafetyjackets.com\/ja\/wp-json\/wp\/v2\/media\/3225"}],"wp:attachment":[{"href":"https:\/\/wp.hsafetyjackets.com\/ja\/wp-json\/wp\/v2\/media?parent=3224"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/wp.hsafetyjackets.com\/ja\/wp-json\/wp\/v2\/categories?post=3224"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/wp.hsafetyjackets.com\/ja\/wp-json\/wp\/v2\/tags?post=3224"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}